Sewing leather and fur, not too different from the other types of sewing equipment. The key to sewing leather is to always try to point on a piece of trash before the act of sewing, then make sure you have your specific model for the role, which will be sewn. The reason for this is so important is that once you have sewn leather, if you make a mistake and need to undo the fabric, leather and will eventually weaken the holes.
Sting
Another trick is that the thickness of the skin or hair, you want to extend his point of three or more. So if you make your point too small, what happens is that the skin is drilled too close together, causing tears.
Another important fact is that you should always leave the child the longer the beginning and end of sewing so you can connect by hand. The only time I use a shot when the seam is a niche or crossed by another seam.
You can keep the joints together, simply by placing a very small, strong seam to sew leather.
When working with models, you'll find leather garments have the same interface in the same places you would find with other types of equipment. If your skin needs to combine a great product on the market called fuse leather is specially designed for leather. With this solution, the skin is melting faster and with lower temperature settings to avoid damaging the skin.
Now move the needle on the thread has been omitted variable cable, pull the needle through the hole. From the leather goes through a quality process of tanning, there is no need to worry about withdrawal. Just be sure to place a piece of brown paper between the iron and leather press and never leave the iron sitting on the skin for a long time.
If you are sewing leather patches with thick, you can use a rubber mallet to hammer.
However, it is necessary to protect the skin from coated paper or cloth, so as not to scratch or nick in the skin.
If you sew the leather, which is more relaxed, you can use lapped seams. Topstitch seam and then simply keep a hole in the plate, you can point that keeps the seam on a nice and straight.
With little doubt, if this happens, do not stop stitching, just keep going. What do you want to do is, when you have finished all the sewing machine, go back and manually bypassed zones above the ring. Start the anchoring of the needle between the layers of clothes, and then import it into the first skipped through the hole.
Now keep in mind that if you need to press down on the canvas, you can use a small amount of steam. Be sure to pull and sew up all ignored. This will keep the integrity of the stitching machine to touch the same time strengthening.
Material
If you are interested in sewing leather garments, handicrafts, or upholstery, you need specific items, which are as follows:
Presser Foot Foot
Leather machine hand sewing needle and needle Glover
The yarn is 100% polyester - do not use cotton or a blend of cotton, because the chemicals in tanning leather rot due to wire
Rubber cement or adhesive tape
Rotating blade to cut the edges *
Wax chalk to mark
Cold strip
Rubber mallet
Patterns
When sewing leather, you do not need a special formula. Simply choose the model of fabric that you like and use the skin instead of any other tissue. Just be sure to choose the model carefully, since some models have a number of seams that do not work very well when you sew the skin
No comments:
Post a Comment